Explore our comprehensive servo pack, multi-mode smart servo, multi-mode smart servo 200 (fast), servo power block, smart robot servo programmers, linear actuators, and more! There are several linear servo RC actuators available from Studica Robotics including 140-200, 140-50, 50-200, and 50-50. Which actuator is best for your robot?
The Studica Robotics Linear Servo RC Actuator 140S-190N is a new linear servo motor which has a stroke of 140mm and a max force of 190N.
The Studica Robotics Linear Servo RC Actuator 140S-95N is a new linear servo motor which has a stroke of 140mm and a max force of 95N.
The Studica Robotics Linear Servo RC Actuator 50S-190N is a new linear servo motor which has a stroke of 50mm and a max force of 190N.
The Studica Robotics Linear Servo RC Actuator 50S-95N is a new linear servo motor which has a stroke of 50mm and a max force of 95N.
Includes,
The Studica Robotics Multi-Mode Smart Servo features all-steel gears and large amounts of torque.
The Multi-Mode Smart Servo 200 rotates at 200RPM. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
The Studica Robotics Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels. The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables.
The Studica Robotics Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
The Studica Robotics Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
The Studica Robotics Servo Hub Pro can be used with the Multi Mode Servo, Multi Mode Servo 200, and most servos with a 25 Tooth gear.
The Studica Robotics Servo Spline Gear is a 30-Tooth Gear with a 25-Tooth Spline. It is used with the Multi-Mode Smart Servo or Multi-Mode Smart Servo 200.
The Studica Robotics 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axle.
Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector.
Specifications:
The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.
The Studica Robotics Servo Mount Flat Plate is designed to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.
The Studica Robotics Servo Mount Offset Plate is used to mount the Multi-Mode Smart Servo (part #75002) to the Studica building structure.
The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.
The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.
Specifications:
The Studica Robotics FTC Power Block is a game-changer in facilitating seamless power connections for various devices throughout your FTC robot.